Interior Flush Door Frames

 

There are many benefits to choosing interior flush wall door frames. They look elegant and modern, while keeping the edges of the door protected. This type of door frame also has Rift and Quarter Cuts to create a uniform look. They are also easy to install. Learn more about these frames and how to choose the right type of interior flush door for your home. After reading this article, you’ll be well on your way to choosing the right interior flush wall door for your home!

Syntesis(r) Flush Door Frames

A perfect combination of a sliding pocket door with a sleek and contemporary profile. Unlike a traditional sliding door, this frame does not require any covering or finishing joint covers. In fact, you can easily add your own lighting, switches, dimmer controls, and sockets. These frames can even be combined with matching double doors. And the best part? They are incredibly easy to install! And if you’re planning to install these doors in a room with a contemporary style, the Syntesis(r) Line system is the answer.

Dayoris Filo Muro Bifold Door

The DAYORIS Filo Pivot Door System incorporates a proprietary slim aluminum frame that is concealed within the wall. The door’s thin aluminum profile creates a frame and casing that is completely invisible. Available in four-foot-wide and floor-to-ceiling applications, this system offers a variety of sizes. This unique design eliminates the need for a header or footer, which provides a seamless look and feel.

Impact edges protect the edges of the door

Impact-resistant doors have rounded stile edges to prevent edge damage. They are usually made of engineered materials and excel in high traffic areas. Externally, these doors are made of solid timber. Rather than using larger stiles, the outside edge of these doors is formed by smaller rails and stiles. The edges of these doors are protected with impact edges and do not need kick plates. But, for high-end applications, these doors may require edge-banding.

Rift and Quarter Cuts create a uniform look

There are many different types of cut patterns available for interior flush door frames. The most common type is known as plain slicing. This type of cut yields straighter grains and a more uniform look. Flat and Rift cuts can also be used to produce this look. V-grooves can also be applied between the individual strips to create an illusion of alternating bands of color.

Adjustable Concealed Hinges from CEAM

These Adjustable concealed hinges for flush door frames are made from cold rolled steel. They are adjustable in three directions and are available in a wide range of sizes and pack quantities. Designed to fit flush door frames, they offer a smooth, soft-close feature. The hinge’s three-way adjustment screws make it simple to adjust its position. Despite being concealed, this hinge can still be accessed easily and quickly.

Plinth blocks

Before installing a new plinth block on an interior flush door, take a few measurements. Measure the width and height of the frame. Mark the baseboard with the measurements and extend the trim along the frame. Make sure that the plinth block is slightly recessed. Use a coping saw to cut the block at the appropriate length. Sand the edges with 100-grit sandpaper. Use matching stain to finish the block.

Impact edges

When selecting a door for a commercial building, the impact edges of a flush door frame are an important consideration. While a commodity door may not need to match the edges, a high-end office space may require a similar look. Contact a wood door manufacturer to specify the wood stiles and edge-banding or ask about an optional option. Once you have determined which type of flush door will best meet your needs, you’ll want to match the material and color.